PRODUCTS  

Gypsum Boards

GYPSUM BOARDS - A skin for the wall

Gypsum is the ideal surface for a wall because it has the same PH value and thermal conductivity properties as the human skin. Gypsum is made up of minerals, and is free of any materials that could negatively influence a sense of well-being. Gypsum is not harmful to human skin: modern medicine uses gypsum directly on the skin to set broken bones; dental technology uses gypsum for molds.

Feel the warmth

Building materials made of gypsum always feel warm when touched. This is no deception as gypsum possesses low thermal conductivity properties. As a result, gypsum building materials store warmth within a building.

Balanced Climate

The secret of a balanced room climate lies primarily in balanced humidity levels.
Once again nature has presented us with a highly effective moisture management system in gypsum.
The gypsum can absorb a lot of humidity through its open and crystalline pores and then automatically releases this moisture when a room becomes too dry. This works as often as necessary, and without consuming energy.

​

TYPES OF GYPSUM BOARDS

GW-R

Knauf Gypsum Wall Board (GW-R)

Knauf Regular Gypsum Boards are ASTM 1396 compliant gypsum Backing Boards,
specifically designed for use where high quality Gypsum Board requirements are
essential to achieve the desired interior design intent.

 

GW-TX

Knauf Type X Fire Rated Gypsum Wall Board (GW-TX)

Knauf Fire Resistant Gypsum Boards are ASTM C1396 compliant, type X Special Fire Resistant gypsum backing boards, specifically designed for use in areas where high fire protection is required.

 

GB-WRTX

Knauf Water Resistant Gypsum Backing Board with Fire Rated Properties (GB-WRTX)

Knauf Fire and Water Resistant Gypsum Boards are ASTM C1396 compliant, type X Special Fire Resistant gypsum backing boards, specifically designed for use in areas where high fire and moisture protection is required.

 

GB- WR

Knauf Water Resistant Gypsum Backing Board (GB-WR)

Knauf Water Resistant Gypsum Boards are ASTM 1396 compliant gypsum Backing Boards, specifically designed for use in areas with humidity and exposure to moisture.

 

Metal Profiles

 

 

Knauf-JTrack
J shaped channels used to form the perimeter frame

 

Knauf-C-TStuds
C-T shaped heavy duty steel sections used to form the vertical frame.

 

 

 

 

EN-BS & DIN

 

KnaufCWStuds.
C shaped profiles friction fit at equal distances into the head and base UW channels to form the vertical metal stud frame.

 

KnaufUWTracks
U-shaped profiles used for forming the floor and ceiling perimeter frame in drywall partitions.

 

Knauf-DeepFlangeUWTracks
U - Shaped profiles used to ceiling perimeter form where high deflection tolerance is required.

 

Knauf-CD60/27Channels
C-shaped channels used for vertical framing in Knauf W623 Wall Lining Systems.

 

Knauf-UD28/27Channels
U-Shaped channels used for perimeter framing for Knauf W623 wall lining systems

Metal Accessories

 

KnaufNoniusHangerTop
Part of the nonius hanger system which is fixed to the structural slab.

 

NoniusStirrup
Bottom part of the nonius hanger system which is attached to the CD channels.

 

NoniusPin
Middle part of the nonius system which is used to attached the nonius hanger top to nonius stirrup.

 

UniversalBracket for CD60/27
Supplied flat, the Knauf Universal Bracket locates Knauf CD channels to the background support. Note that sizes above 120 mm cannot be used with Knauf W623 system.

 

AnkerfixRapidHanger for CD60/27
Anker type suspender for attaching hanger wires to upper / main Knauf CD 60/ 27 mm channels.

 

HangerWire
Galvanized 4mm thick steel wires used as suspenders for D11 Ceiling Systems.

 

UniversalChannelConnector
Galvanized accessories to connect CD channels at intersection points in the Knauf D113 System grid.

 

 

 

Jointing & Finishing Compounds

 

Knauf Easy - Finish       
Knauf EASY - Finish is a pre mixed gypsum based, white finish compound designed for use as a skimming compound on most interior construction surfaces such as gypsum boards, sand/cement render & cement fibre boards. EASY - Finish is designed for internal use only and is intended to provide a perfectly smooth and level surface ready for the final decoration or wall finishing.

 

 

 

 

Readygips Joint Filler and Finishing Compound
Readygips is a high performance pre-mixed compound that is used for embedded joint tapes, beads and finishing of Gypsum panel joints. This compound offers superior working quality and has a good crack resistance due to its excellent bond. Readygips gives the smoothest of finishes with minimum efforts, its formulation ensures a professional /quality drywall finish every time.
Under ASTM C475 and ASTM D3273

 

Perlfix Bonding Compound
Multi- Purpose gypsum- Based Adhesive to be used in place of Knauf Metal Profiles and for direct bonding of Knauf gypsum boards to concrete surfaces.

 

Uniflott Special Joint Filler
Uniflott is a specially formulated joint Compound for use with Cleaneo Acoustic boards to create a seamless finish.

 

Fugenfuller Joint Filler
A fast setting gypsum compound (Powder Based) for bedding joints by hand application.

 

Satengips Finishing Compounds
Satengips is used to obtain a smooth and even surface before the application of wall finishing such as paint and wallpaper.

 

Fire board Joint filler
A Joint filler use with Knauf fireboard to achieve improved fire resistance.

 

Safeboard Joint Filler
A joint filler use for Knauf Safeboard X- ray shielding gypsum board.

 

Special Textile Fiber - glass Joint Tape
Special Textile Fiber Glass joint Tape is a premium joint tape which performs at the best level to prevent cracks and to provide the best finishing.

 

Acoustical Sealing Tape
A purpose made self-adhesive strip which isolates the floor deck from the top of the partition in order to improve acoustic performance.

 

Acoustical Sealant
Knauf Acoustical sealant is a pasty dispersion bound compound for the use of high performance Fire & acoustic rated partition systems.

 

Self-Adhesive Fiber Glass Mesh- Joint Tape
Self-adhesive tape for reinforcing joints by hand application. Knauf Joint Tape – Fiber Glass mesh is recommended on ceilings and to create the strongest joints.

​

Kurt- Paper Joint Tape
Paper Joint tape used for reinforcing joints by hand application, it is recommended to ensure crack free joints on drywall systems.

 

Trenn- fix Self- Adhesive Separation Strip
Knauf Trenn-Fix crack-free connections of drywall partitions or ceilings to the other building materials at abutments by separating them completely. This unique paper tape is applied at the perimeter of drywall partitions or ceilings to avoid crack formation at abutments to blockwork on other building materials.

 

Alux Corner Tape
Knauf Alux Corner Tape is a flexible paper tape roll with metal strip reinforcements. The tape is bent inwards or outwards from the middle and as applied to interior or exterior corners to reinforce the edges of drywall applications such as partitions, ceilings, wall linings.

Knauf A@tch Access Panel

Knauf A@TCH   Regular Access Panels adapt perfectly to any environment, whether it’s for a wall or ceiling, in a public building or at home,

Knauf Regular Access Panels satisfy all the majority of requirements and therefore are the optimal solution for most building structures.

The flush bonded Knauf MR Board allows for flawless surfaces with minimal effort.

​

​

​